THE BRONZE PLAN COVERAGE INCLUDES:

1. ENGINE
Gasoline Engine - Cylinder block, and all internal lubricated parts including; crankshaft, rod and main bearings, cam bearings, expansion (freeze) plugs, connecting rods, wrist pins, pistons, piston rings, camshaft, cam tower, lifters, cylinder head, valves and guides, valve springs, rocker arms (cam followers), push rods, timing chain housing (cover), timing chain and sprockets, timing belt and pulleys, timing belt tensioner, intake and exhaust manifolds, flywheel, balance shafts, harmonic balancer and retainer bolt, crankshaft pulley, valve covers, oil pan, oil pump and pressure relief valve, engine oil cooler hoses, oil filter adapter/housing, engine oil sending unit, engine mounts, water pump, temperature sending unit, thermostat and housing, fuel supply pump, vacuum pump, dipstick and tube, fasteners for the components listed above.

Turbocharge / Supercharged / Rotary / Diesel / Enhanced Engine - All of the above listed parts or equivalent plus: turbocharger, waste gate controller, intercooler, hard lines, compressor, clutch and pulley, bypass valve, injection pump, lines and nozzles.

2. TRANSMISSION
Automatic - Case and all internal lubricated parts including; oil pump, valve body, torque converter, vacuum modulator, governor, main shaft, clutches, bands, drums, gear sets, bearings, bushings, sealing rings, TV cable, solenoids, electronic shift control unit, transmission mounts, cooler, cooler hoses and hard lines, dipstick and tube, fasteners for the components listed above.

Standard - Case and all internal lubricated parts including; main shaft, gear sets, shift forks, synchronizers, bearings, bushings, fasteners for the components listed above.

Transfer Case - (4X4 Vehicles) - Case and all internal lubricated parts including; main shaft, gear sets, chain and sprockets, bearings, bushings, mounts, fasteners for the components listed above, electronic and vacuum engagement components.

3. FRONT WHEEL DRIVE
Final drive housing, and all internal parts including; carrier case, gear sets, chain and sprockets, bearings, bushings, axle shafts, universal joints, front hub bearings, locking hub assemblies (4X4) , drive shaft support, rear axle hub bearings, fasteners for the components listed above.

4. REAR WHEEL DRIVE
Drive axle housing, and all internal lubricated parts including: carrier case, gear sets, bearings, bushings, limited slip clutch pack, axle shafts, axle hub bearings, propeller shafts, universal joints, drive shaft support, front axle hub bearings, seals and gaskets, fasteners for the components listed above.

5. STEERING
Housing/case and all internal lubricated parts including; rack and pinion equipped valve assembly, sector shaft, rack mounts and cushions, inner rod ends and bellows boots, speed sensor or steering gear equipped pitman shaft and valve assembly, sealing rings, bearings, bushings, pitman arm, center link, tie rods, idler arm, power steering pump and pulley, fluid reservoir, pressure and return hoses, cooler and hard lines, power cylinder assembly, steering main and intermediate shafts, coupling, fasteners for the components listed above. (Does not include rear wheel steering components).

6. FRONT SUSPENSION
Upper and lower control arms, bump stop cushions, control arm shafts, torsion bar mounts and bushings, upper and lower ball joints including; dust boots, steering knuckle (spindle), wheel bearings and seals, stabilizer shaft, stabilizer linkage including; mounts and bushings, strut rods and bushings, king pins, fasteners for the components listed above.

7. BRAKES
Master cylinder, assist booster, wheel cylinders, combination valve, disc brake calipers (and rear caliper actuators), hard lines and fittings, backing plates, springs, clips and retainers, self-adjusters, parking brake linkage and cables, fasteners for the components listed above.

8. SEALS AND GASKETS
All seals and gaskets on the assemblies listed in the previous coverage plans.